OFFSITE FACILITIES : a) AMMONIA STORAGE : Ammonia storage facility consists of two Horton spheres each having a storage capacity of 1500 MT of anhydrous liquid ammonia stored at a temperature of 0 degree centigrade and at 3.5 kg per square cm G pressure. Liquid ammonia received in rail tankers of 32 MT capacities each is unloaded in Horton spheres. Vapour generated during the tankers unloading is directly consumed in the process plant. Atmospheric ammonia storage facility consists of three double wall double integrity design storage tanks having capacities of 5000 MT, 10000 MT and 15000 MT at a temperature of -32 degree centigrade and atmospheric pressure. Imported ammonia received in ships is unloaded into the atmospheric storage …show more content…
Imported phosphoric acid received in ships is pumped from the ship to all the storage tanks through an unloading line. Two of these storage tanks are located at the Kandla phase 2 plant. Each of the pairs of processed plants A & B, C & D and E & F are having day tanks of capacity 1350 MT for storage of phosphoric acid at the plant battery …show more content…
8. PHOSPHORIC ACID TANK d) PRODUCT STORAGE AND BAGGING : Two covered storage silos for product storage are available, one for Kandla phase 1 plant and the other for Kandla phase 2 plant. Each of these silos has a storage capacity of 30000 MT. The Kandla phase 1 silo is divided into 4 equal compartments, while half of the Kandla phase 2 silo is 1 compartment and the other half is divided into two equal compartments. The three fertilizers grades are stored in separate compartments. The bagging plant has a total of 14 slat conveyors. Each of them are fitted with two micro processor based semi automatic weighing machine and one stitching machine. Thirteen of them are some are semi automatic weighing machines, each capable of weighing and stitching at the rate of 900 bags per hour, one is a fully automatic weighing and bagging machine with the bag placer having the capacity of 1200 bags per hour. Covered space has been provided for storing more than 3 million empty bags in the bagging plant. The covered loading platform area can be used for stacking more than 5000 MT of bagged product. Bagged product is dispatched by road within the states of Gujarat and Rajasthan and by railway wagons to various destinations of our
If the experiment was completed again, more higher concentrations could be applied to the seeds to see if the data is further supported. Either way the more trials the better and more accurate results, this applies to any experiment. Practical applications of the principles of this investigation may be using the correct concentration for a specific plant or seed. This lab shows that it is necessary to follow the directions and specifications when using the fertilizer miracle
This Way for the Gas, Ladies and Gentlemen is a story written by Polish writer and journalist Tadeusz Borowski. He grew in an era of war which he had to maneuver to survive. The story reflects what he had to go through when he was imprisoned in the most infamous Nazi concentration camp in World War II: Auschwitz-Birkenau. He explains with vivid details his experiences without deepening into obvious moral judgments of his own or other inmate actions and just recounts what he saw and had to do to survive.
Science. The most magical place in school. It was filled with so much chemistry. I absolutely hated it. The teacher was doing everything he could to make my life hell, and he succeeded many times.
1: Introduction to a hydrate. What is a hydrate? Why is it called a hydrate? A hydrate is a compound (usually crystalline) where water molecules are chemically bonded to another compound or an element. This is called a hydrate because the substance is hydrated.
The company was trying to get hold of the 18.79% market share of garbage bags. It was one of the observation that Ad-Lider should opt for larger size bags as smaller volume does not adds to the utility that the handles are adding. The color preference for the product should be dark or black instead of giving it a transparent or lighter shade. The pricing of the product should also be kept in mind.
To protect from the airborne contaminants of an automation space, there is a NEMA 4/4X enclosure around the device. The operating temperature of the device should stay between 0 and 50 degrees Celsius. The device also has a proper operating humidity which is from 5% to 95%. The are a large amount of ports for the user to connect to.
In the poem “Treblinka Gas Chamber”, by Phyllis Webb and in the TRC’s “The History”, both texts share a common theme of inhumane treatment towards children within certain cultural and ethnical groups. While the two authors explore distinct historical contexts, both texts are centred on racial segregation with nationalistic motives. Phyllis Webb appeals to a logos strategy through the use of allusion. In her poem, “Treblinka Gas Chamber”, Webb presents fictional and historical examples to display her knowledge and establish her credibility.
1. List some sources of acid rain. Acid rain is made by a chemical reaction that starts with sulfur dioxide and nitrogen oxides which is the main cause for the harmful effects of acid rain released in the air. These compounds get into the atmosphere where they get mixed and start to react with oxygen, water and other different chemicals to make acid rain. Sulfur dioxide and nitrogen oxide both can dissolve in water.
4. How many levels of biosafety are shown in the facility? Name one
Industry in which Petro-Canada competes Petro-Canada competes with many other oil and gas companies. Shell Canada Limited is one of the best competitors of Petro-Canada. Shell is a subsidiary of Royal Dutch Shell and one of the largest integrated oil companies in Canada. Esso is another competitor for Petro Canada. Industry’s competitive forces 1.A new entry into the industry: Entry into the oil and gas industry involves huge investments and high risks.
CHEMICAL WEAPONS Chemical weapon is a device that uses chemicals formulated to inflict death or harm on human beings. The Organisation for the Prohibition of Chemical Weapons states: “The term chemical weapon may also be applied to any toxic chemical or its precursor that can cause death, injury, temporary incapacitation or sensory irritation through its chemical action. Munitions or other delivery devices designed to deliver chemical weapons, whether filled or unfilled, are also considered weapons themselves.” Under the Chemical Weapons Convention (1993), there is a legally binding, world-wide ban on the production, stockpiling, and use of chemical weapons and their precursors. Not with standing, large stockpiles there of continue to
Resistant on implementing and installation of the new technology might force government to really impose such regulation and that they are always monitored by the regulatory board and also penalties are very serious matter. 3. Plastic manufacturing produces toxic because it composes several chemical that might endanger the living organisms in the water and can be harmful to humans and it is against the law of the Philippines if companies are not responsible with its wastes. III.
Entering in this type of business can be easy for entrepreneurs who already have enough capital to manufacture bags, who already have a background in this type of industry, who are updated in the current fashion trends and those who already know a supplier and a manufacturer that they can do business with. To be able to enter in this type of industry, you will be needing a money amounting to Php 67,416 for the costs that will be incurred for the first month of the operation of the business. Rent for the bazaar amounting to Php 7,500 and Php 300 for the storage, Php 7,032 for the necessary licenses and permits, Php 991.2 for the electricity, Php 300 for the transportation expense, Php 999 for the usage of
As mentioned by Casper (2007), ‘Cold Chain Logistics deals with the production, processing, packaging station, cold storage warehouses, transportation, distribution centres, retailer, end consumer and in the user household refrigerators of products from the manufacture to the customer that are temperature sensitive.’ In this thesis, we are mainly concerned