The Importance Of Flooring In Manufacturing Industry

Part a
The main aim or objective of any industry or factory is to provide easy accessible or make easy to work with the instruments, machine, and the moment of heavy equipment and increase the rate of production.
In setting up of any industry there are lot of option that are available. But it is very difficult to choose which is right, which is economic, durable and satisfy the requirement of the industry. one of the basic requirement Is flooring of the industry. Basically types of flooring are
1. Epoxy flooring
2. Cementitious urethane flooring
3. Thin film urethanes flooring
4. Vacuum de watered concrete flooring
5. Polyaspartics finishing flooring
6. Thixotropic flooring.
7. Elastomeric flooring. (Florock)
Based on the requirement such

Things to be considered when choosing industrial flooring are:
The industrial flooring is mainly built for functionality.it is built choosing right type of industrial floor which is tough durable chemical resistant this are the major properties to be considered.
Ease in maintenance:
Industrial floor is often exposed to chemical, solvent, oil grease. This substance is very hard to remove. especially if the flooring is not planned or designed properly.
In industry, the people are busy with their tasks.it would be better if the flooring doesn’t require more cleaning.
Avoid plain concrete if working with grease or oil materials. The industrial flooring needs clean and hygienic environment so it should be easy to maintain.

Durability
It is another most important factor to be considered when setting up of any industry floor. Because of use of heavy equipment the built-up floor must be strong enough to with stand the heavy material. Floor made up of epoxy are more durable.

Functionality
It is also a most important factor. The floor may look good but can be slippery or can be damaged easily so the floor should be resistant to all kind of wear and tear and should withstand heavy

And it is the most preferred and economic floors for different types of industries for many years. Concrete of the required grade such as M20, M25 etc are put over the PCC and reinforcement bars are design as per requirement. Excess water is removed in a controlled way by using vacuum pumps. The concrete is then prepared to obtain a smooth and dense concrete. VDF floors provide a good concrete floor and it helps in achieving the strength earlier than a different concrete flooring. Due to controlled water-removal as well as power-trowelling, the surface is quite dense and levelled and hence is expected to provide a better abrasion resistance than a non-VDF concrete floor. Adopting the VDC flooring helps in providing good workability than the normal concrete flooring. due to lowered water cement ratio due to vacuum dewatering leads to increasing in each property like compressive strength less shrinkage and minimum water