Hacksaw Machine Short Report
3.2 Experimentation 3.2.1 Cutting performance of hacksaw cutter (cutting time and its performance.)
We have performed a cutting operation of these four blades on three different materials and cutting action was observed.
Followed in sequence which are as follows
1. Brass
2. Aluminum
3. Mild steel
We have taken cutting time for same diameters jobs about materials so we can find about the relative cutting performance. Here 25 mm diameter of work piece taken for cut. This 25 mm round cross section is common for all different work pieces to be cut also we have taken profiles of blades on profile projector before and after cutting of each material for all blades so that relative amount of wear and tear can be determined. 3.2.2. Cutting
…show more content…
HSS blade is best for cutting mild steel.
4. Low alloy steel is best for cutting brass.
5. High carbon steel is best for sawing aluminum.
6. This machine provides higher accuracy as compared to the conventional hacksaw machine.
7. This machine has less vibration.
8. This machine increases the rate of production.
4.2. Advantages of the project.
1. Due to the use of this machine, the need of labor decreases to a great extent.
2. It increases the production rate.
3. It can cut four materials at a time.
4. Apart from cutting, drilling and grinding can also be carried out on the same machine.
5. Only one operator is needed to handle all the processes.
6. It reduces the lead time and also the stress and work load on the worker.
7. Operating cost is less.
8. Maintenance is less and so its cost is less.
9. It improves the productivity of the overall firm.
10. It decreases the material handling.
4.3. Disadvantages of the project.
1. The space required for the machine is very much and so it should be installed only where there is sufficient amount of space otherwise it will lead to space constraints.
2. There are problems of vibrations when it works at higher speeds.
3. There should be proper care taken for the whole
Electronic Medication Error In Long-Term Care
206 Words | 1 PagesStrategies are methods or plans that solves a problem; strategies are essential to resolve issues to be able to prevent them from happening again and it helps to do a better job. Computerized physician’s order, electronic medication administration record with a barcode and reviewing the practice standards from CNO such as medication and documentation are the suggested strategies to inhibit the incidents and the breached ethical values from occurring again. Moreover, using information technology is the first strategy to impede medication error in the long-term care facility where an ethical value such as commitment to client was breached.
Gilded Age In The Late 19th Century
1044 Words | 5 PagesThere was an unpredicted rise in new industrial and agricultural technology that would increase productivity. In the factory, the invention of the Bessemer blast furnace and Siemens-Martin open hearth process would decrease the amount of hard labor and transform the way steel was made. While in America’s offices’s, business communication would be revolutionized with typewriters, following the use of calculators. As a result of the growing industries came an influx of new cities being developed. This expanding infrastructure started sewing back a growing number of laborers and new goods to increase supply of capital.
Cut Men's Hair Case Study
930 Words | 4 PagesClub Cutting Club cutting is the most commonly used cutting technique. It creates a smooth blended look without the use of texture. This cutting technique creates graduated or uniform layers.
What Made The Industrial Revolution Revolutionary
405 Words | 2 PagesAs industrial revolution came in, advanced technology were introduced to the world and it workers in factory were frightened by these technologies. All the easy work were done much efficiently by machines
Vertical Disintegration In The Pc Industry Case Study
353 Words | 2 PagesVertical Disintegration: The division of one organization into a few, with each performing activity leading to a single completed product. Vertical disintegration occurs generally because of diseconomies of scale, which are the consequence of inefficiency because of huge size, make it more advantageous than remaining one corporation. OR Vertical disintegration means dividing an industry into several segments, from upstream to downstream, with each firm concentrating on certain functions of certain segments. The firms in the segments comprise supply chains.
How The Industrial Revolution Changed America
790 Words | 4 PagesThe Industrial Revolution has changed America in many ways, some good and some bad. The most important changes that brought about the Industrial Revolution were the invention of machines to do the work of hand tools, the use of steam, and later of other kinds of power, in place of the muscle of human beings and animals, and the adoption of the factory system. In my opinion the Industrial Revolution has done more good for America than it has done harm. In the beginning of the Industrial Revolution there weren’t many laws that governed the industries.
Ap Euro Dbq Industrial Revolution
848 Words | 4 PagesThe assembly line, whose use in industry was spurred by Henry Ford in his automobile factories. The assembly line, interchangeable parts, and other inventions vastly increased the speed of production and lowered production costs. Because of these new manufacturing techniques speeding and cheapening production, “[People’s] clothes are cheaper, [People] have an infinite number of domestic utensils,” and [People are surrounded…with an infinite number of comforts and conveniences…within reach of almost all men,” (Document 9). Faster and cheaper production meant bountiful and cheaper products that could be sold to the public. Anybody could purchase a variety of products and comforts faster and far cheaper than ever before.
Hacksaw Ridge Movie Report
1463 Words | 6 PagesMovie Report: Hacksaw Ridge The movie Hacksaw Ridge takes place during World War II on the island of Okinawa against the Japanese. The bombing of Pearl Harbor, Hawaii in 1941 while under Franklin Roosevelt 's presidency by the Japanese triggered America’s involvement in World War II. Hacksaw Ridge is a historically accurate movie pertaining to the real life events of what went on between the characters, the settings and events during World War II at Hacksaw Ridge in Okinawa. Desmond Doss, who is the main character, lived with his family in Virginia: Tom Doss, his father, Bertha Doss his mother, and Harnold Doss, his brother.
Coca Cola Demand Curve
1041 Words | 5 Pages2. TECHNOLOGY: Automation is led way to decrease in the cost of production. Techniques to optimize production means the suppliers will supply more at a lesser rate. Coca cola recently implemented the Siemens automation to increase the capacity of its bottling plants. This ensures that the capacity of the plants increased manifolds and thus lowering the cost of production.
Four Key Business Functions
707 Words | 3 PagesThis ensures quality of product and “smooth” running of the
Alice Inc Case Study Solution
1145 Words | 5 Pagesyou may find that total amount of costs assigned to Regular model is $765.857,14 and $771.142,86 to Deluxe model. After final computations you can see that the cost of one unit of Regular model is $2,55 and cost of one unit of Deluxe model is $3,87. b) Determine the product costs and profits per
Operations Management Case Study: American Connector Company
2441 Words | 10 PagesConsider both DJC’s performance in Kawasaki and its potential in the United States. The cost differences between plants of ACC at Sunnyvale and DJC at Kawasaki has been compared by calculating their manufacturing cost. In 1991, the two plants are located in different countries (US & Japan) and therefore, to compare the costs between the two, the cost indices values that have been provided in the case have been used. The main cost differences between the two companies: DJC and ACC with respect to their plant operations for the years 1986 & 1991 have been shown in Table 1.
Advantages And Disadvantages Of Plant-Wide Allocation Methods
750 Words | 3 PagesNow, let’s briefly consider main advantages and disadvantages of ABC Advantages: ABC provides a more accurate cost per unit. As a result, pricing, sales strategy, performance management and decision making should be improved. It provides much better insight into what drives overhead costs. ABC recognises that overhead costs are not all related to production and sales volume.
7-Series Project: The Root Cause Of BMW Quality Issues
723 Words | 3 Pages• Workers spend more time on Bigger issues and less time spent on Minor issues. • More Customer Complaints. • More Confusion among workers, leading to Logistics issues. • All issues are not Fixed at Pilot Phase. • Involvement of Suppliers in Final Engg.
Personal Statement Of Purpose For Mechanical Engineering
888 Words | 4 PagesIn the first year of my graduation, the subject of workshop technology was offered which helped me to understand the basics of manufacturing. It involved study and working on machines like Lathe, Milling, Universal Grinding Machine, and other specific machinery. In later stage of my graduate programme, I
More about Hacksaw Machine Short Report
Electronic Medication Error In Long-Term Care
206 Words | 1 PagesGilded Age In The Late 19th Century
1044 Words | 5 PagesCut Men's Hair Case Study
930 Words | 4 PagesWhat Made The Industrial Revolution Revolutionary
405 Words | 2 PagesVertical Disintegration In The Pc Industry Case Study
353 Words | 2 PagesHow The Industrial Revolution Changed America
790 Words | 4 PagesAp Euro Dbq Industrial Revolution
848 Words | 4 PagesHacksaw Ridge Movie Report
1463 Words | 6 PagesCoca Cola Demand Curve
1041 Words | 5 PagesFour Key Business Functions
707 Words | 3 PagesAlice Inc Case Study Solution
1145 Words | 5 PagesOperations Management Case Study: American Connector Company
2441 Words | 10 PagesAdvantages And Disadvantages Of Plant-Wide Allocation Methods
750 Words | 3 Pages7-Series Project: The Root Cause Of BMW Quality Issues
723 Words | 3 PagesPersonal Statement Of Purpose For Mechanical Engineering
888 Words | 4 Pages