How To Remove A Trumpet Essay

Removing a stuck trumpet slide is the most difficult part of the trumpet cleaning process. When you need to remove a slide for cleaning, you must avoid damaging the slide in the process. Slides become stuck due to a lack of proper maintenance or physical damage to the horn. Slides must be greased with a suitable lubricant at least once per month. Regular cleaning will not only keep your slide functioning properly, but it will ensure that the instrument maintains a clear tone since dirt and debris will affect the sound of the trumpet.

Step 1 Remove the trumpet mouthpiece if it is attached by twisting counterclockwise and pulling up on the mouthpiece.

Step 2 Remove the three valves by twisting the valve caps in a counterclockwise direction.

Turn the instrument three to five times so that the soap coats the inside of the tubing. Place the trumpet in a bucket of warm water and attempt to pull out on the slide. You may need to wiggle the slide slightly toward the top and bottom of the instrument to free it from the trumpet tubing.

Step 4 Remove all of the slides from the trumpet, including the valves. You should not place the valves in water since they will rust easily.

Step 5 Soak the slide and trumpet in a solution of warm water mixed with 2 tablespoons of liquid soap.

Step 6 Push the trumpet snake into one end of the trumpet tubing and push it all the way through the horn. Pull out the snake as soon as it reaches the other end. Repeat this process with all of the slides.

Step 7 Clean the trumpet valve casings with a valve brush while the trumpet is submerged. Scrub gently using a straight up-and-down motion with the brush.

Step 8 Push the valve brush through the holes in each valve to remove any debris and grime that has built up over time.

Step 9 Dry the trumpet thoroughly with a dry cloth. Allow the trumpet to sit out with the bell facing downward to allow all the remaining water to drain from the