Career Episode One Introduction C.E 1.1 I completed this collective project in the optoelectronic information laboratory of University of Shanghai for Science and Technology from July to October 2011 when learning the photoelectric detection technology. As the team leader, I completed the project design, team organization, actual operation and other core work. Background C.E 1.2 Upon completion of the basic course research in the freshman and sophomore year, my teacher Ling Chen believed that he should enhanced our practical ability, so he provided us with the topic of the research on lubricating oil film thickness precision detection technology of the sliding bearing based on the principle of the optical fiber displacement sensor. Our research object was water film thickness detection. C.E 1.3 First, I made exhaustive investigation of the actual significance of the work. I found that the water film thickness detection was an important means to avoid friction and abrasion and avoid the original working performance and service life. For example, in …show more content…
I first determined that the hardware circuit was mainly composed of a stabilized voltage supply module, a light source module, a photoelectric conversion module, a low pass filter module and a dividing hardware module. I had completed the design of some hardware circuits before this project and found that the complex hardware had tedious wiring. As for this project, each module had a chip requiring power supply. If the power required by each module was supplied through an external power supply, the power connection wiring would be complex. So I independently designed a power module divided by two CS3673 chips to obtain +12V and -12V voltage. In terms of light source selection, I selected HFBR-1414 optical fiber emitter with the wavelength of 820nm, because it was characterized by high optical coupling efficiency, low energy consumption and stable
1) $250,000 or $500,000 (MFJ) gain exclusion on sale of principal residence as long as the ownership and use test have been met. 2) Divorce-Related sales are required to list the use agreement in the divorce decree so that both spouses may receive the gain exclusion upon the sale of the home. 3) Depreciation taken post-May 6th 1997 can be recaptured as a section 1250 gain, subjecting the recapture amount to a maximum tax rate of 25%. 4) Like-kind exchanges of a residence can allow for the taxpayer to deter the gain under section 1031.
This section discusses the results are obtained from Matlab/Simulink software. The simulation consequences are obtained in two scenarios with taking in account the variation of wind generation. The first scenario examines the test system with SSSC, set on Line 1 and between the buses 1 and 2, but without power oscillation damping (POD) role. This exam is conducted through applying three-phase fault at midpoint of Line 2. The fault is applied at 1.33 second and it takes 10 cycles to clear the fault by the two breakers at the end of Line 2.
pecial Conditions Permit Number 9576 1. This permit covers only those sources of emissions listed in the attached table entitled “Emission Sources - Maximum Allowable Emission Rates” (MAERT), and those sources are limited to the emission limits and other conditions specified in that table. Startup, Shutdown, and Maintenance Emissions 2. This permit authorizes emissions from Flare (Emission Point No. [EPN] 400) for startup and shutdown activities associated with product transitions.
Bernadine Conklin Ms. Gross/Mrs. Abrams Quantitative project Section 3 20 October 2015 EAN-13 Check digits and codes are very important to the function and efficiency of a successful society. Whether it be the credit card codes or even looking at barcodes so an item is victoriously scanned. An important one that is used is the EAN Which stand for The European Article Numbering Code or even EAN-13 which is used for the identification of retail products. This contains both the 12 digit data of the product and the 1 check digit naming it a barcode of a numerical value of 13 .This was originally based off the old code of UPC-A (Universal Product Code), it then became the new standard of numbering codes. People
At first, the magnetic field sensor was plugged into analog A. Next; a magnetic field sensor was open in the Database Studio software by following several instructions. Once the magnetic fields sensor was free, we clicked on the “digits” that was on the lower left side of the screen. Then, the window appeared where it was ready to record the magnetic field. After the computer part was completely set up, we measured the diameter of the Helmholtz coil several times to get the more accurate measurement and recorded the measurement in the data. Later, we set up our device in a way that current flows in the same direction for all the coil.
Lab 7: Moon Phases was designed to measure the relative position of the Sun and Moon over the course of one phase cycle (i.e. one month, 29.5 days) The idea for Lab 7: Moon Phases was to examine how the illumination of the moon by the Sun produces the different phase cycles we see as the Moon rotates around Earth and as the Earth rotates around the Sun. The observations of the Moon were taken on four different days in the month of February to March capturing four different Moon Phases.
Parrish, We have a green light. One additional requirement, is that risk assessment team works with MAT to complete the following: 1) Work in tandem with Fred to "develop a criteria / written documentation to assess Wi-Fi access points (WAP) devices so when the risk assessors go out to perform their assessments that validation understands what to ask for and how to validate these devices for CS security to include "best practice" mitigation hardening for these devices. 2) Find out where all these Wi-Fi WAPs are included in the packages. Our database could be of use to them. (E.g. FARs comes to my mind as I know they use WAP) In additional, have them find out who else uses WAPs?
Osk.exe not working error in windows 8 must not be ignored and this is because the file remains responsible for Accessibility On-Screen Keyboard in Windows Systems. In fact, the error which is generated is primarily in the numerical data format. It is important that you take steps to rectify the same as many annoying error message pop-ups might be generated and slow down your PC considerably. Further, there remains ample scope for system freeze and blue screen of death (BSOD) issues happening as well.
1. 1. Data scrubbing is which of the following? A. A process to reject data from the data warehouse and to create the necessary indexes B.
1. Discuss the differences and similarities between a peer-to peer network and a client server network. Answer: The following are characteristics of a peer-to-peer network that differ from those of a client server network.
Everyone please read the instructions to all assignments to make sure I outlined all the potions correctly. You are not only responsible for your own portion, but for everyone else’s as well. I sometimes find Walden’s instructions to be quite difficult, so to make sure that I understood them correctly I would like everyone to go over them and correct any mistakes and/or typos I may have made. Professor Bissonette pointed out that I outlined root cause as a plural (root causes) whereas it should be a single root cause. That one S at the end of “cause” could have affected our entire project.
Gardner explained the rational around why all this can be important and the question I need to ask myself is based on the points that have been raised by Gardner above. 1) Do I have the creating capability in within me? I think I do but not as high as I would believe it to be and as such most of the work that I do is being replaced by technological breakthrough everyday 2) Do I have the synthesizing capability?
Unit 9, Lesson 9: Digital Business Cards and Brochures 54.12— Define data mining. 54.13— Identify basic tools and techniques of data mining. 54.14— Explain the use of data mining in Customer Relationship Management (CRM). 54.15—Identify ethical issues of data mining. Lesson Intro Reading 9.9: Activity 9.9: ____________________________________________________________________________ Unit 9, Lesson 10: Digital Business Cards and Brochures 55.01—Publicize e-commerce site through non-Internet means such as mail, press release, broadcast media, print media, and specialty advertising.
SCENERIO Baxter, a year three Aboriginal student who at age three developed a sensorineural hearing impairment after repeated exposure to Otitis Media. Baxter uses a cochlear implant on one ear, as the other was not viable. Unfortunately, due to bullying in previous years Baxter has limited confidence in his communication skills and will rarely speak aloud, except with the teacher privately, close friends, and family. Baxter often communicates using basic sign language, but relies heavily on gestures. He is currently working with a speech therapist to increase his speech and language skills and to increase his confidence.
Break Point 6.2 I think that the students are trying to describe what most people cannot: the effect that music has not on our minds, but our bodies. Because the mind is not involved in this physiological process, one can only begin to describe why we get "pumped," why our heart rates increase or why our moods change when we hear a certain piece of music. In the conversation in Chapter 6, each student seems to have a different way of describing how music makes them feel, which supports my belief that each student has a unique physiological approach when listening to or performing music that is unlike that of anyone else. As the chapter mentions, there is no true explanation as to why some people get goosebumps when a certain song plays and others do not. Personally, my musical tastes are all across the board, and change