Gasoline Essays

  • The Pros And Cons Of Torco Gasoline

    1981 Words  | 8 Pages

    Introduction - Some car owners go their entire driving lives relying on the predetermined octane level of whatever kind of gasoline they use. These people don’t get the most out of their engines. If you want to see exactly what your car is capable of, you should experiment with octane booster additives. What Is Octane? - Have you ever wondered what those little numbers on gas station pumps are there for? 87. 89. 93. What do they mean? Well, those numbers denote the octane level of the gas inside

  • Hybrid Cars: Advantages And Disadvantages Of Hybrid Cars

    1134 Words  | 5 Pages

    twin powered engine which are used to reduce the pollution. Basically, most of the experts say that the electric engine is used for lower speed and gasoline engine is used for higher speeds. The hybrid car not only consumes less fuel but it also produces less amount of carbon dioxide emission. The hybrid car runs on twin powered engine like gasoline and electric motor that cut fuel consumption, reduce air pollution and conserves more energy (Rinkesh, 2009). Many experts say that one of the biggest

  • Idemitsu Diesel Case Study

    1161 Words  | 5 Pages

    Idemitsu Lube (Singapore) Pte Ltd offers new range of extreme series pro, touring and eco environmental friendly Gasoline Engine Oil products as you reliable automotive lubricants. We give you gasoline engine oils suitable for CNG vehicle, and are API certified. Idemitsu Extreme Eco 0W20 , one of our fully synthetic engine oil which is most recommended for all modern 4-stroke gasoline engines. It is specially formulated and designed to have much more improved fuel efficiency performance, exceeding

  • Advantages And Disadvantages Of Gasoline

    819 Words  | 4 Pages

    I. Gasoline Gasoline is a derivative of petroleum when it is refined. It is made out of hydrocarbons in liquid form that is very flammable. The main use of gasoline is to be a fuel source for combustion engines. To obtain gasoline from petroleum fractional distillation is used where in the different type of hydrocarbons from petroleum, which has different boiling points is heat at different temperature. The different hydrocarbons then condense to liquid. The main ingredients of gasoline are

  • Eugene Houdry: The Catalytic Converter

    908 Words  | 4 Pages

    the year 1930. A catalytic converter is a automobile pollution control device. It converts more toxic pollutants from automobile emissions into the less toxic pollutants. A catalytic converter used in a internal combustion engine fueled by either gasoline (petrol) or diesel. The catalytic converter is generally divided into three parts (Robert et al. 2005). 1) Two way catalytic converter 2) Three way catalytic converter 3) Four way catalytic converter The two way catalytic converter is generally

  • Hybrid Electric Vehicle Research Paper

    1332 Words  | 6 Pages

    Abstract A 'gasoline-electric hybrid car' or 'hybrid electric vehicle' is a vehicle which relies not only on batteries but also on an internal combustion engine which drives a generator to provide the electricity and may also drive a wheel. It has great advantages over the previously used gasoline engine that drives the power from gasoline only. It also is a major source of air pollution. The objective is to design and fabricate a two wheeler hybrid electric vehicle powered by both battery and gasoline

  • Essay On Electric Cars

    732 Words  | 3 Pages

    distance and speed. Most of these can only travel up to about 50 to 100 miles without being charged. You just can’t use them for long distant travel as of now, although it is expected to improve in future. It takes a couple of minutes to fuel your gasoline powered car, an electric car can take about 4 to 6 hours to get

  • Wall Impingement Model

    1260 Words  | 6 Pages

    example, in internal combustion engines, gas turbines, spray painting in vehicles and ink-jet printing and also in the field of agriculture and medicine. Nowadays, the advancement in gasolines engines had led to the direct injection of gasoline into the combustion chamber, similar to direct-injection diesel engines. In gasoline direct injection engines, the fuel droplets may impact the combustion. In these engines, fuel is sprayed with pressure of up to 200 bar. At these pressures spray strikes the combustion

  • The Pros And Disadvantages Of Cars: The Advantages Of Alternative Cars

    937 Words  | 4 Pages

    From an energy perspective, electric cars use a factor of far less energy than gasoline cars at the point of use, but this advantage is partially compromised by inefficiencies at the point of electricity generation. Even inefficient coal-fired electricity leaves an advantage for electric cars, and efficient gas-fired combined cycle electricity leaves electric cars more than a factor of two more energy efficient than gasoline cars

  • Turbocharger Case Study Solution

    1458 Words  | 6 Pages

    Turbochargers for vehicle internal combustion engines normally include a compressor impeller that compresses the gas flow delivered to the intake manifold of the engine. In carbureted gasoline engines the gas flow is an air fuel mixture, while in diesel and stratified charge engines the gas flow is only air or other oxidant gas. The compressor is driven by a turbine which, in turn, is driven by exhaust flow from the engine exhaust manifold

  • The Pros And Cons Of Diesel Engines

    1167 Words  | 5 Pages

    Diesel engines outperform and produce less emission rates on Earth than gasoline engines. On the other hand, gasoline engines cost less to run daily. With the EPA making diesel emission standard more stricter, the emission rate for diesels have decreased. Also with different equipment being installed to diesels, the power has increased too. How much have the EPA standards lower the emission rates? Ever since the EPA has enforced standards for diesel engines, the emission rates have progressively

  • 3.6 Engine Control Unit

    1839 Words  | 8 Pages

    3.6 ECU Engine control unit, one type of electronic control unit that manages an engine's operation. Most modern engines use some type of fuel injection to deliver fuel to the cylinders. The ECU determines the amount of fuel to inject based on a number of sensor readings. Oxygen sensors tell the ECU whether the engine is running rich (too much fuel/too little oxygen) or running lean (too much oxygen/too little fuel) as compared to ideal conditions known as stoichiometric. The throttle position

  • The Advantages Of Hybrid Cars

    1193 Words  | 5 Pages

    objective. Hybrid cars are cars which have two engines. First one is the common gasoline engine. The second one is an electric engine. The reason for joining these two engines is to maximize the efficiency of the cars and reduce the waste of the engine power. Therefore, the electric engine is used to reduce speed and reduce torque. For example, during the rush hours and congestion, cars are continuously stopping. Gasoline engine is used for high speed and better performance for driving on highways with

  • Essay On Bunker Tanks

    1163 Words  | 5 Pages

    to produce power output. It is noted to the point where that the fuel or gasoline of your car or even bike is stored the vehicle specific space which is in the tank. The same can be said is that the fuel for ships are stored in that said tanks which is in a part of the ship and they are called the “Bunker Tanks”. The term that is being used to describe the on-going process of which on getting your vehicle filled with gasoline or petrol fuel from a petrol bunk is known as “refueling” which is the same

  • Traffic In Metro Manila

    1243 Words  | 5 Pages

    Being stuck in traffic is a normal scenario in Metro Manila. What they call rush hour becomes rush hours and some areas do not even ease out until end of day. On a personal note, since changing jobs early this year, I haven’t dealt with heavy traffic because of my new work conditions. I have flexible working hours and locations provided I report within the core hours of the country I should mirror. I really have little to complain about but remembering how extreme the traffic situation was when I

  • Multi Point Injection System Essay

    1047 Words  | 5 Pages

    Stoichiometric ratio is also called lambda ratio. For the gasoline fuel, or petrol the value of the ratio is 14.7 parts of air and 1 part of fuel. So if lambda equals 1, the air-fuel mixture is at the Stoichiometric ratio, of 14.7 to 1 (14.7:1). If an air-fuel mixture has a higher figure, say, 1.03, there is more

  • How Do Driverless Car Change The World

    1377 Words  | 6 Pages

    Have you ever thought of how driverless cars would change the world. Or maybe you thought that driverless cars would be good for people in the world. Driverless cars would be great for pedestrians and disabled people. But if you are going to use driverless cars so you can read your kindle or watch something on your ipad instead of taking yourself to your destination, then you’re just being lazy. Being lazy is not a good thing because life is supposed to be filled with challenges and the goal in life

  • Essay On Internal Combustion Engine

    916 Words  | 4 Pages

    2.1. Internal Combustion Engine The internal combustion engine is an engine in which combustion of the fuels takes place inside a chamber in the engine, usually known as the combustion chamber. The reaction is an exothermic reaction that releases gases at a high temperature and pressure, thus producing work. The engine to be used in this research project is a diesel engine, which is a form of the internal combustion engine. All internal combustion engines depend on combustion of a chemical fuel,

  • Cranckshaft Case Study Conclusion

    815 Words  | 4 Pages

    Cranckshaft:- it is the heart and the main part of motor engine which response on deliver the motion from motor to drive system which happen because the effective combustion process Cranckshaft is contain parts to help motor in its motion and working on save the balancing the rotating motion of cranckshaft those parts are :- 1-oil bores: its mission is to deliver the lubricant liquid to every part in cranckshaft 2-balance bores: to balancing the mass of Cranckshaft to avoid any vibration 3-cranck

  • Process Oil

    796 Words  | 4 Pages

    The Process oil is a combination of paraffinic, naphthenic, and aromatic compounds with varying molecular weight. It is used as raw material component or as an aid in processing of materials in industries such as textile, rubber and polymer. Process oil is produced by refining processes such as catalytic dewaxing process and advanced hydrocracking. Process oil obtained after refining is colourless and exhibits high performance qualities such as high saturation, low volatility, and increase in purity